Double Glazing Lock Repairs
A good quality lock on your doors and windows can stop burglars from accessing your home. They generally don't like breaking glass or squeezing through open windows.
Some double glazing owners, however, have had issues with their door or window lock after the installation. These problems can often be fixed without the need to replace double glazing.
Broken or faulty locks
A locksmith can fix your uPVC window lock or door lock if it is damaged or is not working properly. They will be able to fix the striker plates, hinges, and locks on your double-glazed. They can also move the cylinder around to fix any misalignment problems which could cause your handle to not work properly.
The mechanism may be locked when the key fits into the lock, but it will not turn or is difficult to insert. This could be due to dirt or grime getting stuck within the mechanism. If this is the case, then it might be possible to clean the lock and then lubricate it. It is important to apply a dry lubricant like graphite or teflon instead of oil which can attract dirt and stick to the inside of the mechanism. After you have lubricated the lock, you must insert the key and try to turn it. The lubricant should work its way through the mechanism, and the lock should be able turn without difficulty.
A faulty lock can also be caused by loose screws within the mechanism of the lock. They can become loose and fall out or even break off completely preventing the lock to perform as it should. A screwdriver can be used to tighten the screws but care must be taken not to over-tighten them as this can cause damage to internal components.
A damaged lock could be dangerous for both you and your family members, especially if you have small children. They can easily unlock the door without knowing and gain access to your home. If you're worried about the possibility that this could happen, a vetted professional locksmith can assist you secure the double-glazed doors.
Misty Glaze are a professional uPVC and double glazing business in Lancing that can fix any type of defective and broken mechanisms such as handles, cylinders, handles and lock systems on uPVC windows and doors. We can also modify your uPVC or double glazing locking system to meet your particular requirements, meaning that in many cases replacement windows and doors are not required.
Handles that are damaged or faulty
As part of their overall security package most double-glazed windows feature a multipoint lock. This is a great choice for those who are concerned about potential thieves who may try for ways to gain access to your home. Ask your locksmith for antilift locks. They can be put in as an addition to the existing locks and will ensure that your windows are securely closed.
Handle locks can be damaged or fail. They are the first component that a criminal will use to force open your window. The good news is that this is one of the most straightforward parts to fix.
Modern uPVC handles and aluminium handles come with a multi-point locking mechanism known as Espagnolette, which is designed to ward off forced entry. This upgrade to security is typically available as an extra on new uPVC window installation. Older style uPVC and aluminum handles can be upgraded to lock bolts that shoot, again as an optional option on double-glazed windows.
It is essential to fix a handle as soon as possible if it is damaged. A damaged handle could prevent the window from closing properly and allow drafts to get in. It can also be a flaw that opportunistic thieves could exploit, putting your family's belongings and your own at risk.
The process of fixing the failed mechanism starts with opening the frame of the window and removing the broken handle. The gearbox that opens the handle is then located and the model is identified, so that a replacement may be found that matches the profile of the internal window frame mechanism.
After the mechanism has been replaced the handle can then be fixed using the original screws - however, we usually recommend replacing them with longer ones since this will provide the most secure fit. The final step is to apply a coating of clear sealant in order to protect the handle from further rust. Once that's done, double glazing repair near me will be functional again and at only a fraction of the cost of replacing the entire window.
Hinges that are Broken or damaged
If your windows don't close properly, you could suffer from draughts or the weakening of your home's security and an increased chance of damp or water damage. Windows hinges that break or fail are a common issue and are easily fixed.
If your uPVC windows won't open or close, it is likely that the hinges require to be repaired or replaced. While many window companies require you to purchase a whole new window unit to fix this simple problem We're able to repair the faulty hinges and save you money.
Window hinges can be damaged through repeated use, or weakening over time due to corrosion. If you have a broken window hinge, it's important to take precautions to avoid further damage. This means not causing the window to close or open.
You can locate the appropriate parts for your hinge by identifying its type. Maco, Mila and Roto are all manufacturers of window hinges. Consult a professional to avoid buying parts that do not fit with your existing hardware. This can result in further damage.
The hinges that are not working properly can cause big issue for your uPVC windows and doors. They can be a major source of noise, and they can also allow for water infiltration that can cause damage to your windows.
To fix this issue, first verify that the pin barrel on both sides of the hinge is aligned. If it isn't then tap the head pin with the hammer to create a small bend in the barrel of the hinge. This will help to keep the pin in place. Then, ask a helper to hold the door while you take the hinges and hinges from both the doorjamb and the door. Replace the hinges and install screws with glue. Finally fix the hinges using clamps or weights while the glue dries.
After you have repaired the hinges, you can install the door again. You could also reattach the handle. Replace the screws with wooden dowels that are the same length as the screw that was used to ensure that they match.
Broken or faulty glass
uPVC Windows can become damaged over time, despite the fact that they are excellent at keeping out the cold and retaining warmth. This could include cracked or damaged glass, as well as faulty locks. If left unattended, this can turn into a major expense. It can also affect the aesthetics of your house and could lead to a loss of insulation, which is why it's crucial to repair any damage as soon as you can.
If your glass has broken but isn't shattered it is possible to fix it yourself with the proper tools and methods. Be sure that the area surrounding the broken glass is clear of debris so that any fragments don't cause injury or trip hazards. After that, take away all broken glass pieces and dispose of them in a proper manner. Apply masking tape to the entire area. This will stop glass fragments from sticking to your skin and splintering when you move them. If you're dealing with a double-paned window, it's best to fit the glass pane before glueing it back in place to ensure that you'll have enough room to complete the task.
Use a clean, dry cloth to wipe down the surface of the broken glass and the frame prior to applying the glue. Follow the curing and application directions that differ from product to product. Depending on the degree of the crack you may need to clamp the glass to hold it in place during curing. This can be done using lightweight clamps that are designed to hold delicate materials.
After the adhesive has completely set, carefully place the glass into the window frame. Make sure that it is flush with the frame edge and that there aren't any gaps between the glass sash and the frame. Avoid flexing the glass as you install it again because this could weaken the seal. This could result in water infiltration or condensation.
If you have a glass window that's completely shattered or has larger cracks, consult a professional glazier such as O'Brien(r) to organise a replacement. It's important to act quickly in the event of broken glass.